Maintenance And Cleaning; Declaration Of Conformity - D+H KA 66-TW Notice Originale

Locking force adjustment
If factory-set locking pressure of ca. 150 N is not
sufficient to close the window, it can be infinitely
increased up to ca. 250 N.
Put in covering stopper after adjustment.
Locking force adjustment
Ø 2 mm
ca. 150 N ca. 250 N

Maintenance and cleaning

Inspection and maintenance has to be carried out
according to D+H maintenance notes. Only original
D+H spare parts may be used. Repair is to be carried
out exclusively by D+H.
Wipe away debris or contamination with a dry, soft
cloth.
Do not use cleaning agents or solvents.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following directives:
2004/108/EC, 2006/95/EC
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Thomas Kern
Member of the Board
12.10.2009
99.823.90 2.1/07/11
=
Maik Schmees
Authorized signatory, Technical Director
Guarantee
You will get 2 years guarantee
from date of verified handing over of the system up to
maximal 3 years after date of delivery, when
mounting and starting has been carried out by
authorized D+H-distributor.
D+H guarantee is expired, with connection of D+H
components with external systems or with mixing of
D+H products with parts of other manufacturers.
Disposal
Electrical devices, accessories and packaging
should be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose electrical
devices into household waste!
According the European Guideline
2002/96/EC for waste electrical and
electronic equipment and its implemen-
tation into national right, electrcal devices that are no
longer usable must be collected separately and
disposed of in an environmentally correct manner.
English
for all D+H products
an
9/20
KA 66-TW