Sony BRAVIA XR-75X95J Manuel De Référence page 8

For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
TV's rear cover
• Refer to the following table for
wall-mount hole pattern.
Model Name
XR-85X95J
XR-75X95J
XR-65X95J
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
8
US
Wall-mount hole
pattern
×
400 × 400 mm
300 × 300 mm
300 × 300 mm
Note
• Read the supplied safety documentation for
additional safety information.
• For more detailed information, visit Sony
Customer Support website.*
* Only on limited region/country/TV model.
1
Remove the terminal covers.
XR-85X95J / 75X95J
XR-65X95J
2
Remove the screws from the rear of
the TV.