Publicité
Les langues disponibles
Les langues disponibles
EN
Thank you for choosing an Elipson audio product.
Please read carefully the following information before using your new loudspeakers.
It contains tips to get the most of it and instructions for safety use.
We strongly recommend that you keep the packaging and this user manual for further use.
I. CONTENT
• 1 speaker :
PF14F, PF24F, PF34F
PFSUB8, PFSUB10, PFSUB12, PF11C, PF14C, PF14LCR
• 2 speakers :
PF6B, PF8B, PF6ATM, PF7SR
• 1 user manual
• 1 removable magnetic grid (all speakers)
• 1 removable base + 4 screws :
PF8B, PF14F, PF24F, PF34F, PFSUB8, PFSUB10, PFSUB12, PF14C
• 4 rubber pads per speaker :
PF6B, PF8B, PFSUB8, PFSUB10, PFSUB12, PF11C, PF14C, PF6ATM, PF7SR, PF14LCR
• 4 decoupling (thread M8) spikes per speaker :
PF14F, PF24F, PF34F
II. PREPARATION
1a
1a. Mounting the removable base on the cabinet (PF8B, PF14F, PF24F, PF34F, PF14C)
Carefully turn the cabinet over and place it on the packaging foams, or on a carpet,
to avoid any damage on the top part. Take care not to damage the woodworking, the
lacquered front or the loudspeakers during this operation. Adjust the base on the cabinet
and screw it using the four provided screws.
1b. Mounting the removable base on the subwoofer cabinet (PFSUB8, PFSUB10, PFSUB12)
Start by positioning the aluminium cylinders in the recesses provided for this purpose. Place
the base on the cylinders and secure with the provided screws.
Dear Customer,
1b
20
2a
2a. Sticking the rubber pads (PF8B, PF14C, PFSUB8, PFSUB10, PFSUB12)
We recommend that you stick the rubber pads, provided with the removable base, on the
loudspeakers. If you use the loudspeakers without the removable base, you should place
the rubber pads on the provided inserts, to avoid any damage.
As a rule, you can stick the rubber pads under the loudspeakers or under its base in order
to protect the loudspeaker itself and its base.
2b. Putting spikes (PF14F, PF24F, PF34F)
After mounting the base of the speaker, screw the spikes on it (no required tools).
Note: The presence of pads or decoupling spikes prevents vibrations to be transmitted to
the floor.
3a. Mounting the wall speakers (PF7SR, PF14LCR)
Make sure the brackets have been securely fastened flat against the wall (pay attention
to hollow wall anchors) and that the wall is able to bear the weight of the loudspeakers.
3b. Positioning the PF14LCR speaker with a permanent screen or TV screen
Place the speakers as close as possible to the screen. The mounting brackets allow you to install
the speaker horizontally or vertically.
2b
21
Publicité
