ARDES AR5S41PBT Mode D'emploi page 17

Batteries
Remote control is supplied without batteries; before use remote control
open the batteries holder placed on the back of remote control and insert
2 batteries LR03 1,5V AAA.
To remove batteries, open the batteries holder placed on the back of the
remote control, by sliding the cover to the outwards.
OFF Button (A):
Press this button when the unit is on, to turn it off.
ON/SPEED Button (B):
Press this button when the unit is off to turn it on.
Press this button when unit is on to select the desired speed: low speed
(display will show "01"), medium speed (display will show "02") or high
speed (display will show "03").
MODE Button (C):
Press this button when unit is on to select the desired mode: natural
("Nature" indicator light), sleeping mode ("Sleep" indicator light) or normal
("Nature" and "Sleep" indicator lights will turn off). When the sleeping
mode is selected all the indicator lights will turn off (except "Sleep" light)
after few seconds.
TIMER Button (D):
When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press this button repeatedly to select the
desired time period in half hours increments from 0,5 hours to 7,5 hours.
The display will show the setted time in hours and the "Timer" indicator
light will turn on. To deactivate the timer function press timer button till the
display will sho "00" or turn the fan off manually. When the timer function
is off the timer indicator light will be off in the control panel.
SWING Button (E):
Press this button when unit is on to activate the automatic oscillation from
left to right. When oscillation function is activated the related indicator
light ("Osc") is on in the control panel. To deactivate the automatic
oscillation press again this button.
VERTICAL SLOPE:
You can vertically point the front of the fan
choosing the desired angle. It is sufficient to
move the front of the fan up or down according
to the desired slope.
17