Publicité
Provided item
Wall mount
Wall mounting screw
Ø5 x L65
Wall mounting screw for wood
Ø3 x L18
• Check the material of the wall and the thickness of the finishing.
• Use the Wall mount anchor for wall material of concrete, light
concrete, strong natural stone, soft natural stone masonry brick
and hallow block that do not crack.
Wall Material
Tools
Concrete
Wall mounting anchor,
Wall mounting screw,
Brick
Drill bit (Ø 3 / 6 / 8)
Natural stone
Metal Panel
Plywood
Wall mounting screw,
Drill bit (Ø 1.8)
EPS Panel
Plasterboard +
Plywood
• When installing on a gypsum board or medium-density fiberboard
(MDF) wall, fasten the screws to the studs that support the wall. If
there are no studs, check the distance from the inner wall before
installing.
- 30 mm (1.1 inches) or below: Install directly on the inner wall
using a 65 mm (2.5 inches) screw.
- 30 mm (1.1 inches) or above: Install using a separate hanger.
Punching Guide
Wall mounting anchor
Wall Thickness
70 mm
(2.7 inches)
30 mm
(1.1 inches)
Penetrate the
wall
30 mm
(1.1 inches)
Wall
• When installing the wall mount, check the positions of the wooden
studs using a stud finder. Then, fasten the screws on at least two
separate studs before proceeding.
Stud
• When installing the product on wall material not designated,
install the product so that each location can withstand the pull
out load of 70 kg (154.3 lbs) and shear load of 100 kg (220.4 lbs)
or above.
• Use the Ø 8 mm (0.3 inches) drill bit for concrete and hammer
(Impact) drill.
Wall mount
7
Publicité
