Beper P206VEN410 Mode D'emploi page 9

Press ; by pressing this key once, the continuous mist function is activated,
and by pressing the key twice the mist function works intermittently (the mist
is released from spray nozzle at regular intervals). To deactivate mist function,
press 3 times.
Note: the item is equipped with an auto-shut off system, which automatical-
ly turns the mist function off when water runs out.
The item is also fitted with a LED light with interchangeable colors, which can
be turned on even when the fan is not operating and the mist function is off. To
activate LED light, it is enough to press
turns on, switching color at regular intervals. To select a specific color, wait until
this lights up, and then press
fixed on the selected color. To turn the LED light off, keep
Cleaning and maintenance
Make sure that the product is off and/or unplugged from wall socket, before pro-
ceeding with cleaning.
Clean the water tank with a little water and, if necessary, neutral soap., to remove
any scale deposits or residues.
Use a soft, slightly damp cloth to clean the outer surface of the item.
Warning: keep the motor case and the fan away from water, to avoid
short circuiting and malfunctions.
The item comes with a spare cotton swab, which can be used to replace the one
installed on the item. To proceed with this operation, remove the motor case with
fan from the water tank, by rotating it counterclockwise. Pull the little plastic tube
in which the cotton swab is contained, removing it from its seat. Remove the used
cotton swab and replace it with the spare one provided, laying it on top of the
spring found inside the plastic tube Fig.B.
Technical data
Power: 2W
Working voltage: 5V DC – 1.5A
Lithium battery pack 2000 mAh
For any improvement reasons, beper reserves the right to modify or impro-
ve the product without any notice.
for approx. one second: the LED light
for another second approx.: the LED light is now
9
for another second.
EN