Télécharger Imprimer la page

Beper P206VEN410 Mode D'emploi page 8

Mini ventilateur avec pulvérisateur

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Description of product Fig. A
1. Fan
2. Spray nozzle
3. Fan key
4. Spray key
5. Water tank level
6. USB charging port
7. Charge indicator
Operation
The item can be used both in rechargeable mode and connected to the mains
supply.
To charge the item, connect it to any device fitted with a USB port (laptop, PC,
power bank, etc.), or to a wall socket, through USB adapter (not included).
Once the item is connected, the charge indicator found next to the USB port
will turn red, and will shut off once the battery is fully charged (approx. 3 hours).
During charging, it is possible to continue operate the item, without interruption.
Note: it is advisable to completely charge the item every two-three months,
to avoid any battery damage.
To activate the fan, press
twice, for medium speed, and three times for high speed. To turn the fan off,
press
four times.
It is possible to adjust tilt angle of the fan up to 180°.
Important: the item is equipped with an auto-shut off system, that will
automatically deactivate all the functions when the fan is closed on
the motor case.
To activate mist function, make sure that the water tank contains enough water.
Fill the water tank, gently removing the motor case with fan by turning it counter-
clockwise; pour water into the tank, making sure that the water level is below the
rim, to avoid spilling once the motor case is re-installed. It is possible to add a few
drops of scented oil, suitable for nebulization.
Important: do not use essential oils, since they could obstruct the ato-
mizer and prevent spraying.
Re-install the motor case with the fan on top of the tank, making sure that it is well
fixed and correctly closed.
; fan will start running at low speed. Press the key
8

Publicité

loading