Dacor DRF365 Serie Manuel D'utilisation page 46

Troubleshooting
Smart Grid
Symptom
What Do I Need
to use the Energy
Management and
Smart Grid functions?
Why isn't the Energy
Management function
working normally?
Why isn't the Delay
Defrost Capability
working normally?
46 English
FDR_Dacor_BRF8000M_DA68-03574H-02_EN.indd 46 FDR_Dacor_BRF8000M_DA68-03574H-02_EN.indd 46
• To use the Smart Grid (Demand Response) and Energy
Management function on your Refrigerator, you need the
following devices and apps:
- Devices: 1) A Wireless Router, 2) A SmartThings
Refrigerator, 3) A Smartphone. (Recommended: Android
OS 6.0 or later version)
- Applications: 1) "SmartThings App" from the Goolge Play
Store.
You also need to:
• Connect the Refrigerator and the Smartphone to the same
Wi-Fi network in your home.
• Install and run the SmartThings App on your Smartphone.
• In addition, to use the Smart Grid (Demand Response)
function, you must Register for the service with your
electric company. The company must have an EMS (Energy
Management System) that supports SEP (Smart Energy
profile).
• Confirm that the router in your home and the internet are
working properly.
- Connect a Smartphone to the router (AP, Access Point),
and then confirm that you can browse the Internet on the
phone.
• Confirm that refrigerator is connected to the AP.
- Check for Wi-Fi icon on the panel of the refrigerator. If the
refrigerator is connected, the icon will be on.
• Confirm that the refrigerator and Smartphone are connected
to the same router.
• Confirm that the router in your home and the Internet are
working properly.
• Connect a Smartphone to the router (AP, Access Point), and
then confirm that you can browse the Internet on the phone.
• Confirm that the rear where you live is properly entered into
the SmartThings App.
• Confirm that the Smart Grid function works correctly. (Check
the control panel. The DAL or TALR icon should not be
displayed on the panel.)
Action
2021-07-16 2021-07-16 4:10:28 4:10:28