Publicité
English
Installation
This wall outlet requires a ½" NPT male nipple,
extending ⅝" outside the surface of the finished wall.
Seal the wall around the nipple
using waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Wrap the threads on the nipple using Teflon tape.
Install the mounting piece.
Install the elbow. Tighten it using a 27 mm wrench.
Do not overtighten the elbow.
Install the cover.
Place a dab of waterproof sealant at the grout
joints.
4
Publicité
