Logitech Jabra BH970 Mode D'emploi page 10

BH970 Wireless Mono DECT Headset
Step 7: Make a test phone call
10 10 English
All manuals and user guides at all-guides.com
Test call from desk phone
1. Ensure the headset is docked, and then
press and hold the desk phone button
on the base keypad until the desk phone
icon changes to
2. Remove the front panel of the BH970, as
illustrated.
3. Put on the headset. The desk phone icon
will change to
change, tap the desk phone button on
the base keypad.
4. Press the headset button on the desk
phone, or lift the desk phone handset, to
get a dial tone.
5. Make a test call. Dial a friend or
colleagues phone number using the desk
phone.
6. Check your speaking volume. If the
listener says your speaking volume
is too quiet or too loud, adjust the
microphone volume control on the base,
as illustrated. Ensure the listener does
not adjust their own volume.
7. When finished, end the call and return
the front panel of the BH970.
.
. If the icon does not