JVC KW-ADV64BT Manuel D'instructions page 45

Using a rear view camera
• To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view
camera, ☞ Installation/Connection Manual.
Activating the rear view camera
1
On <AV Menu> screen:
2
To deactivate, select <Off>.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• For KW-ADV64BT/KW-AV60BT/KW-AV60 : To erase the
caution message, touch the screen.
To display the picture from the rear view
camera manually
On <AV Menu> screen:
When displaying the picture from the rear view
camera manually, you can change the setting of the
☞
picture. ( page 43)
To cancel the rear view screen
45