JVC KW-ADV64BT Manuel D'instructions page 34

Using other external components
• When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
• To change settings for video playback, ☞ page 43.
Source type ("AV-IN" or
"Front AUX")
[Mode]* Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.
* Appears when "AV-IN" is selected as the source.
Front AUX
1
Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2
Select "Front AUX" as the source.
(☞ page 12)
3
Turn on the connected component and
start playing the source.
AV-IN name* ( ☞ below)
*
34
AV-IN
You can connect an external component to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
Select <AV-IN> for <AV Input> setting. (☞ page 47 )
• <AV Input> setting can be changed only when
<Input> setting in <Navigation Input> is set to
<Off>.
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
(☞ page 12)