Publicité
Les langues disponibles
Les langues disponibles
Adjusting the sound precisely
1
1
Perform steps
preset sound mode," then...
2
Select a band.
3
Adjust the sound.
Reset
Changes level of Low/Mid/
High to 0.
Freq
Selects frequency.
Q
Adjusts the width of the
frequency.*
Bass
Activates/deactivates bass.*
SW Level
Adjusts subwoofer level.
The adjustments are overwritten if <User>
setting has been made (☞ page 39), and <User>
is activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
2
3
steps
and
.
1
*
Fixed for "High" band.
2
*
Only for "Low" band.
2
and
of "Selecting a
1
2
Adjusting the crossover
frequency
1
On <AV Menu> screen:
2
3
Select the item to adjust, then make
adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Adjusts the crossover for subwoofer (low pass filter).
Adjusts the crossover frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.
* Not selectable when <Freq> is set to <Through>.
40
Publicité
