Publicité
Les langues disponibles
Les langues disponibles
Detachable back and seat cushions
Attach both cushions before using the wheelchair.
The cushions are folded in place and attached
using a Velcro fastener.
Footrests and leg supports
The wheelchair is equipped with swivelling foot-
rests. The footrests can be swivelled upwards to
make entry and exit easier.
The leg supports can be
also be swivelled outwards
and returned to position
as a whole. The leg sup-
ports are also removable
to enable the wheelchair
to be folded as small as
possible.
at
The leg supports are
swivelled outwards to
insert them, then turned
inwards with by applying
slight pressure until they
lock into place. Remove
the leg supports by pres-
sing the unlocking button
and swivel the footrests
outwards.
When attaching the leg
supports, always ensure that they are properly
engaged.
Important: the leg supports and footrests are not
suitable for carrying or lifting the wheelchair when
it is occupied.
Armrests
To adjust the armrest height, use the side button
to unlock the armrest and set the desired height.
Release the button to lock the armrest into place.
When travelling in the wheelchair, we recommend
that you set the armrests to the highest position.
Important: Side parts are not suitable for lifting or
carrying the wheelchair.
Tyres
The REHASHOP "Zebra" lightweight wheelchair
is equipped with a full set of puncture-resistant
rubber tyres. There is no need to check the tyre
pressure. If the tyres are worn or excessively aged,
they can be replaced by a specialist retailer.
Detachable axles on the rear wheels
The wheels used to propel the REHASHOP "Zebra"
lightweight wheelchair come equipped with a
quick release axle as standard, which means that
they can easily be removed without any tools. To
remove the wheels, press the locking button on the
ch
verpleeg-
A L L E S W E E R Z O G O E D A L S V R O E G E R
nl
GB
13
Publicité
