Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
A six-digit code instructs the radio only to receive an ALERT when the
code is programmed in. There are far too many S.A.M.E and CLC codes
to include them all in this manual. We therefore provide the following
to assist you in looking up the code for your area.
Look up a United States county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at: http://www.msc-smc.ec.gc.ca/msb/
weatheradio/transmitter/index_e.cfm Your radio can be set for one (SINGL)
to 23 (MULTI) codes, or can be set to receive ALL coded information sent
from any transmitter, if you're within range. When you set codes, it will only
pick up alerts when you're in that county or within reception distance of the
signal. ALL, MULTI or SINGLE COUNTY will appear in the lower left side of
the display, depending on how you have set it.
1. In the radio off mode, press <MENU> button shortly and then press
or
to enter to "COUTY---ALL/SINGL/MULTI" mode.
2. Press
or
button shortly with "ALL", "SINGL" or "MULTI" flashes,
then press
or
button repeatedly to select from the three.
Select "SINGL" if you want to enter a code for a single area.
Select "MULTI" if you want to enter mutiple codes for different areas.
COUNTY --ALL
3. Press
or
to start inputting county code.
4. Press
or
to set first code digit.
5. Repeat step 3. 4. all the other digits are set.
6. Press the <MENU> button to confirm and exit.
02CODE-----
SOLARLINKFR370 OWNER'S MANUAL
ALL
COUNTY
ALL
COUNTY
11
Publicité
