Beper VE.451H Manuel D'instructions page 10

All manuals and user guides at all-guides.com
Box Fan Use instructions
PRODUCT Fig.1
1 – Body fan
2 – Revolving front grid
3 – Blade
4 – Rear grid
5 – Switch on/off revolving grid
6 –Timer
7 – Speed selector
8 – Cord supply
INSTRUCTION
USE
Check that the speed switch (7) is on 0; the switch on/off revolving grid (5) is on OFF. Plug the cord
supply (8) to the socket.
To make the fan on, press the switch on and choose the speed desired with the speed selector (7);
choose the speed is possible turning the selector to the right and to the left.
Selector 0 the fan is off.
Selector 1 low speed.
Selector 2 medium speed.
Selector 3 high speed.
To switch off the fan, press the speed selector (7) on 0 and press the switch on/off revolving grid (5)
on OFF.
REVOLVING GRID
The revolving grid (2) is controlled by the switch on/off revolving grid (5).
Press ON to activate the revolving grid.
Press OFF to stop the revolving grid.
TIMER
Turn the timer button (6), when the fan is on, to set the extinction time. The maximum time is 60
minutes. The fan will switch off automatically once the timer ends.
If you do not want to use the timer, press on/off (6) ON to activate the fan. To switch off, press the
button (6) on OFF.
CLEANING
Before cleaning switch off the fan and unplug the supply cord.
Use a soft cloth, if necessary lightly wet.
Do not use alcohol or chemicals substances as thinners.
Do not spray water or other liquids on the fan; do not introduce liquids into the fan.
Well dry every cleaned parts before switch on again the fan.
10