Publicité
Les langues disponibles
Les langues disponibles
LEVELING THE REFRIGERATOR
Now that the doors are back on the refrigerator,
you want to make sure the refrigerator is level so
that you can make final adjustments.
If the refrigerator is not level, it will not be possible
to get the doors perfectly even.
The front of the refrigerator is also
adjustable.
Before leveling the refrigerator, remove
the front leg cover.
Open both the freezer and fridge doors, and then
take off the front leg cover by turning the three
screws counter-clockwise.
When the Freezer part is lower than the
Fridge part.
Insert a flat-blade screwdriver into a slot on the
Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the
Freezer part.
Insert a flat-blade screwdriver into a slot on the
Fridge Leg, then turn it clockwise.
Screw Driver
Refer to the next section for the best way
to make very minor adjustments to the
doors.
DA68-02981E-00.indb 14
All manuals and user guides at all-guides.com
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
In the case of the process to correct the imbalance
is the same. Open the doors and adjust them, one
at a time, as follows:
1. Unscrew the nut ( 1 ) from the lower hinge until
Leg
English - 14
When the door of the freezer is higher than
Adjustment part
it reaches the upper end of the bolt ( 2 ).
When you release the nut ( 1 ), make sure
that you use the hex wrench provided
( 3 ) to loosen the bolt ( 2 ) in a counter-
clockwise (
) direction.
You should then be able to unscrew the
nut ( 1 ) with your fingers.
the fridge
(3) Wrench
(2) Bolt
(1) Nut
13. 12. 12.
3:07
Publicité
