Maintenance And Repair - KAYSER WHIPcreamer STYLE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

MAINTENANCE AND REPAIR

• When it is not possible to easily insert the unit
piston K513A in the head after cleaning during
the reassembly of the Kayser unit head, smooth
movement can be restored by lubricating the
piston gaskets with cooking oil.
• Please contact Kayser should other problems
arise.
• Check the condition of the head gasket (K750)
and of the two gaskets on the piston (K513A)
before each use – see page 2. When signs of wear
become visible or leakage occurs during use, then
these parts must be replaced. Before each use,
check the bottle, the unit head and the threads
for possible signs of wear or damage. If any such
wear or damage is found, the WHIPcreamer STYLE
may no longer be used.
• Please contact your specialist dealer or Kayser
should you require spare parts or repairs.
• You may not perform modifications or repairs
on the WHIPcreamer STYLE or its safety devices
yourself.
• For repairs, always send the Kayser WHIPcreamer
STYLE empty, clean and with all of its parts to
your specialist dealer or to Kayser.
CLEANING
Note: The unit must be cleaned thoroughly before
each use of the WHIPcreamer STYLE or after the
bottle contents have been completely removed.
1) Before opening the WHIPcreamer STYLE, actuate
the lever until neither the bottle content nor the
gas is discharged from the unit (see image I on
page 3).
2) Unscrew the Kayser unit head from the bottle and
disassemble it as shown in the image (page 2).
3) Clean the WHIPcreamer STYLE parts with a mild
washing-up liquid. Never use sharp objects for
cleaning. Never boil the bottle out! Do not use
cleaning agents that could dissolve aluminium or
plastics! Do not clean in a dishwasher!
4) Rinse off the decorating nozzle with warm water
after each use.
WARRANTY
Each Kayser cream whipper is thoroughly inspected
at the factory. For this reason, we grant a warranty
of two years from the date of purchase, provided the
unit is used and operated correctly. The warranty is
voided when third-party parts or chargers are used.
For this reason, please keep your proof of purchase
and read the operating instructions and the safety
precautions with care.
11

Publicité

Table des Matières
loading

Table des Matières