Uline H-7646 Instructions D'assemblage page 2

2. Using 10 mm wrench and Phillips screwdriver,
assemble front and back supports with eight Phillips
head bolts and M6 flange nuts. (See Figure 2)
Figure 2
3. Remove drawer from desk top. Place desk top on
a smooth, non-marring surface with top side facing
down. Flip base frame upside down and place
onto desk top. Using a 10 mm wrench and Phillips
screwdriver, fasten desk top to frame with 16 Phillips
head bolts and M6 flange nuts. (See Figure 3)
Figure 3
PAGE 2 OF 12
ASSEMBLY CONTINUED
4. Set desk top assembly upright and recheck all
screws and nuts for tightness. (See Figure 4)
TOP SHELF ASSEMBLY
1. Place top shelf on desk top and assemble with six
Phillips head bolts and M6 flange nuts. (See Figure 5)
Figure 4
Figure 5
0922 IH-7646