INFOSEC UPS SYSTEM 61458 Manuel Utilisateur page 16

2. Introduction
The module is used as an external maintenance bypass switch to provide continuous power
without shutting down the connected loads during UPS scheduled maintenance or battery
replacement. It's perfect to use in conjunction with the E6 LCD TM RM 15-20 kVA.
Rack Mount the Unit
The module can be mounted to a 19" enclosure. Please follow below chart for rack mount
installation.
3. Product Overview
Diagram 1: Rear panel View
Diagram 2: Terminal Overview
Rear panel explanation
1. Input/Output terminal (refer to diagram 2 for the details)
2. UPS input breaker
3. Maintenance bypass switch
4. Control output signal slot
5. Output terminal
6. UPS output terminal
7. UPS input terminal
8. Utility input terminal
9. Grounding terminal
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
16
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 10 15 AA 59 203 04