Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Blank Screen
Power indicator is off
-
Make sure the power cable and the power adapter are connected properly (see section “Connecting”).
-
Make sure that the monitor was turned on using the power switch (see section “Startup”).
Power indicator lights orange
-
Is the PC turned on (see your PC’s documentation)?
-
Could a power saving mode be active? Press any key on your keyboard or move the mouse. (See ”Energy
Saving Functions” section).
-
Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
-
Is the PC turned on (see your PC’s documentation)?
Power indicator lights green
-
A screen saver may have activated automatically after a certain period of inactivity. Press any key on your
keyboard or move the mouse.
“No Signal” message
-
Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
-
Is the PC turned on (see your PC’s documentation)?
Display Problems
Image is displaced to the left/right or to the top/bottom
-
If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter ”Basic Setup”, section ”Automatic Image Adjustment” or chapter ”OSD Menu Functions”, section ”Auto
Adjust”.
Image flickers or is shaky
-
Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows
9x/ME/2000/XP consult the “Configuration” section.
Image is blurred
-
Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Contrast" and “Brightness").
-
Check the video noise setting (see chapter “OSD Menu Functions”, section “Phase“ and „Clock").
Color problems
-
If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see
“RGB” function in section “OSD Menu Functions”).
ENERGY SAVING FUNCTIONS
This monitor is equipped with power management functions
according to EPA standard. If your computer is using a
compatible graphics adapter or appropriate software, energy
consumption can be automatically reduced when your
monitor is idle. When the monitor is in power saving mode,
the color of the status LED (see
Mode
Video
On
aktive
Off
blanked
This monitor is ENERGY STAR ® -compatible. MAXDATA is an ENERGY STAR ® partner and guarantees that this device
complies with the ENERGY STAR ® guidelines for optimizing power consumption.
in figure 4) will turn orange.
H-sync
V-sync
yes
yes
no
no
The monitor will automatically switch back on when you
use the keyboard, mouse or another input device.
The following table illustrates power consumption values
and display indications for this automatic power saving
feature:
Power
Power
Used
Saving (%)
< 50 watts
0
< 3 watts
94
Operating Instructions - 17
ENGLISH
®
LED
color
green
orange
Publicité
