Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONFIGURATION
Monitor setup under Windows
XP:
If using the monitor under Windows
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Berlinea.TXT
files. Follow the installation instructions in the
README_Belinea.TXT file.
BASIC SETUP
Automatic Image Adjustment ...................................
You can adjust the image settings (such as brightness,
contrast, image position, phase etc) manually or by using
the LCD monitor’s automatic image adjustment feature.
This will adjust the image parameters to their optimal
settings for the current graphics mode. To reset the image
settings choose the RESET option from the OSD menu.
Direct contrast and brightness adjustment ...........
When the OSD menu is not displayed on screen you can
set the contrast and brightness directly by pressing the
IMAGE SETTINGS USING THE OSD MENU
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
Figure 4. Monitor features
14 - Belinea 10 17 15
9x/ME/2000 and
Monitor setup under Windows
®
Under Windows
9x/ME/2000 or XP
Select the vertical frequency and the number of colors
®
directly from within the “Settings” à “Control Panel” à
“Display” à “Settings” menu.
or the
Direct Volume Setting ..............................................
You can adjust the speaker volume of the integrated audio
system directly by pressing the OSD button
and
increase the volume press the
press the
1. Press the MENU button (
2. There are a total of 6 OSD submenus divided by
3. Press the SELECT OSD button (
4. Set the desired value using the OSD button
5. Press the SELECT button again to save the setting.
6. The OSD menu automatically disappears if no changes
NT 4.0 no separate setup file is required.
®
‡
†
or
buttons (
and
in fig. 4). Press the
button to change the brightness, then press the
button or the
button to change the contrast.
„
in fig. 4) while the OSD menu is not active. To
button to decrease or the volume.
ˆ
in fig. 4) to display the
OSD menu on the screen.
categories. Select the desired submenu by pressing
‡
the OSD button
or
(
and
”OSD Menu Functions”).
activate the selected function or associated submenu.
or
.
Repeat steps 2-5 to make further adjustments as
needed.
are made for more than 10 seconds. The current
settings will be saved. You can close it manually by
pressing the MENU button.
NT 4.0:
®
button
…
or
(
button to increase or
†
in fig. 4, see section
ƒ
in fig. 4) to
or
or
Publicité
