Dell PowerVault MD3200 Mise En Route page 11

All manuals and user guides at all-guides.com
2 PowerVault MD3200 series storage array
NOTE:
Before turning on the host server(s), ensure that the storage array
status LED is blue.
3 Host server(s)
Installing the Bezel
Install the bezel (optional).
Installing the MD Storage Software
NOTE:
For detailed instructions about installing the MD storage software, setting
up the enclosure, and the post-installation tasks, see the Deployment Guide.
The MD Storage Manager application configures, manages, and monitors the
storage array. To install the MD storage software:
1 Insert the MD series resource media.
Depending on your operating system, the installer may launch
automatically. If the installer does not launch automatically, navigate to
the root directory of the installation media (or downloaded installer
image) and run the md_launcher.exe file. For Linux-based systems,
navigate to the root of the resource media and run the autorun file.
NOTE:
By default, the Red Hat Enterprise Linux operating system mounts the
resource media with the -noexec mount option which does not allow you to
run executable files. To change this setting, see the Readme file in the root
directory of the installation media.
Getting Started With Your System
9