Audio Unlimited SPK-ROCK-DUO3 Manuel Du Propriétaire page 4

All manuals and user guides at all-guides.com
INSTALLATION
TRANSMITTER
1. Connect the supplied AC power adapter to an electrical wall outlet
2. Plug the AC power adapter (12V/200mA) in the DC jack located at the rear of the transmitter, or you
can insert 4 X "AA" size ALKALINE batteries (not included) into the battery compartment of the
transmitter with correct polarity
3. Turn on the transmitter by setting the POWER switch to the "ON" position, and the POWER LED
(blue) on the transmitter will start flashing
4. The retractable audio cord that is located at the front of the transmitter can be connected to the
audio output jack of any audio source such as i-Pod, i-Phone, MP3 mobile phone, Hi-Fi,
MP3/CD/VCD/DVD players.\, laptops, computers and more.
5. As soon as the transmitter is receiving the audio signal, the POWER LED (blue) will illuminate
steady.
SPEAKER RECEIVER
1. Plug in the power adapter with the rock speaker and AC power outlet to charge the lead acid battery
built inside the rock speaker. The battery pack must be charged at least 12 hours before operating
the product for the first time
P.3