Samsung RH69B Manuel D'utilisation page 49

Untitled-18 49
4. Press the clamp as shown.
5. Connect the electrical harness.
6. Connect the wire connectors.
CAUTION
• Make sure the wire connectors are
connected properly. Otherwise, the
display will not operate.
7. Connect the water tube.
- This step does not apply to the
models without the AutoFill pitcher
and the water dispenser.
CAUTION
• To prevent water leaks, make sure the
red clips tighten the coupler properly.
• Keep the clips out of children's reach.
8. Insert the hinge covers with the front
sides first, and then tighten the screws.
Use a Phillips screwdriver for this step.
English 49
2022-04-11 3:09:42