Publicité
Les langues disponibles
Les langues disponibles
17
Attach the fan blade assembly to the fan motor assembly by aligning the blade
bracket screws with the screw holes in the motor assembly. Tighten screws securely.
Mounting
Ring
18
Remove one of the three mounting
plate screws from the mounting ring
and loosen the other two screws. Place
the key holes in the mounting plate over
the two screws previously loosened from
the mounting ring. Turn the mounting
plate until the mounting plate locks in
place at the narrow section of the key
holes. Securely tighten the three screws.
Blade Brackets
Screws with
Lock Washers
Mounting
Plate
Screws
17
05
Mounting
Plate
19
Remove one of the three light kit
mounting screws from the mounting
plate and loosen the other two screws.
While holding the light kit under the fan
motor assembly, make the 2-pin wire
connections:
- White to white
- Black to black
Wire
Connectors
Light Kit
Screws
Publicité
