Publicité
Les langues disponibles
Les langues disponibles
Cross Pin
Setscrew
04
Take out the setscrew located in the
hanger ball, lower the hanger ball and
remove the cross pin. Remove the
hanger ball from the hanger
ball/downrod assembly.
Downrod
Clevis pin
06
Carefully feed the motor wires and
safety cable up through the downrod.
Thread the downrod into the collar.
Align the holes and replace the cotter
pin and clevis pin. Tighten the two collar
setscrews.
Clevis pin
Downrod
Hanger Ball
05
Remove the clevis pin and cotter pin,
and loosen the two collar setscrews from
the motor collar.
Cotter pin
Setscrews
07
Slip the coupling cover, the canopy ring,
and the canopy onto the downrod.
13
05
Canopy
Coupling
Cover
Cotter pin
Setscrews
Canopy
Ring
Publicité
