Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL SPECIFICATIONS
Model No.
THSF022 / THSF022N
Item
Fan heater
Voltage:
220-240V~ 50/60Hz
CLASS II
This product conforms to the requirements set by directives 2014/35/EC (repealing directive 73/23/EEC
amended by directive 93/68/EEC) and 2014/30/EC (repealing directive 89/336/EEC)
USING THE HEATER:
Do not use this heater in a bathroom
1. Before using this appliance, ensure that it is placed on a flat, stable surface.
This appliance is equipped with an anti-tripping switch that switches the appliance off in the event that it
tips over and is not placed on a stable surface.
2. Check that the voltage corresponds to that of the power supply (230v mains socket) Once the appliance is
plugged in, turn the thermostat dial and the light will switch on.
3. Turn the thermostat dial in a clockwise direction towards "MAX. ", then turn the "0" dial towards "
activate the ventilator motor. Check that everything is functioning correctly.
4. Turn the function setting switch from "I" to "II" to select your chosen temperature. (Hot/ Very hot)
To set the power, turn the dial from 0 towards I or II:
0 = Off
= ventilation
5. After reached the desired temperature, to maintain the temperature: turn the thermostat knob
counterclockwise until the light turns off. The desired temperature will be kept constant by the thermostat
function.
6. The heater comprises a protection device protecting against overheating. If the fan heater overheats, a
temperature limiting system inside the appliance will automatically cut the power supply from the heating
element while the ventilator continues to function to cool the appliance. The appliance can re-start as
soon as the normal conditions and temperature needed for it to function are re-established. Identify the
causes of this overheating to avoid any recurrences.
7. When not using this heater, return the 2 dials to their initial position: "0" and "MIN. ", and then unplug it.
PRECAUTIONS FOR USE AND MAINTENANCE:
1. Always unplug the appliance and keep it away from any socket before cleaning.
To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly with a soft, dry
cloth before using again.
Do not use any cleaning or chemical products of any kind. Do not let water enter the openings on the
heater.
2. When the appliance is not being used for prolonged periods, ensure that it is fully unplugged from the socket
and store in its packaging for simple storage and later use.
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose
of the appliance it must be separately collected. Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
Power level (mode I)
Power level (mode II)
I = hot
II = very hot
EN-5
1000 W
2000 W
" to
Publicité
