VMI VISION'R VENTILAIRSEC CUBE Notice page 77

E. Modifying the ventilation mode
This operation can be carried out using the VMI+ application and on the control unit.
1.
To access this function, open the VMI+ application, and pair your VMI
application. Refer to the previous paragraph Modify preheating settings with VMI+ and repeat
step 1 Log in to the application, step 2 Pairing and step 3 Machine identifier when logging in for
the first time.
Step 4: Modify the ventilation mode
Select the CONFIGURATION button and then SIMPLIFIED CONFIGURATION.
•
Then adjust the cursor to match your preferences. The new theoretical flow rate is
•
automatically calculated and displayed.
o
o
o
Modifying the ventilation mode via the VMI+ application
If the cursor is on the left, the VMI
to low speed. The air is renewed at a rate of
0.36 volume/h.
If the cursor is positioned in the middle, the
VMI ® unit is set to medium speed. The air is
renewed at a rate of 0.45 volume/h.
If the cursor is positioned on the right, the
VMI unit is set to high speed. The air is
®
renewed at a rate of 0.55 volume/h.
CUBE unit with the
®
unit is set
®
77