Publicité
Les langues disponibles
Les langues disponibles
needed for power operation.
Choosing a safe location
Never install it in high and windy places, as the sunshade may drop and hurt people. The
location for mounting your automation device: this location must allow for the automation
device to pick up the signals easily to ensure maximum sensitivity of the command box.
Do not use it in places that have vibrations or impulsions.
In case of use of a command box, the electronics board must be set vertically and sheltered
from the weather.
The installation can be made by non-professionals assuming the instruction is followed
correctly. Should you have any trouble during assembly, please consult a qua
help.
Please use all the screws and nuts correctly during installation as it is very dangerous if you
leave it loose.
Be careful with y
ngers around moving parts of the product during installation.
3. ELECTRICAL SAFETY
CAUTION: The installation must be conform to the regulation of the country.For your safety,
connection operation.
> Waterproof junction box (IP54)
> Cables
Before connecting the appliance to the power supply, check that the power supply voltage and
current rating corresponds with the power supply details shown on the appliance rating label.
A readily accessible disconnect device must be incorporat
with setup regulations.
Danger of electric shock! Do not attempt to repair the appliance yourself. In case of
malfunction, repairs are to be conducted by qua
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qua
rsons in order to avoid a hazard.
For an inspection or maintenance of the electrical parts, the external blind shall be
disconnected from the energy supply in a reliable way.
What you will need: hardware not provided:
>
BATTERIES
79
(CR2450 3V)x 1
xed wiring in compliance
rsonnel only.
FR
ES
PT
I T
EL
rson for
PL
UA
RO
EN
Publicité
