Neuton CE 5.2 Consignes De Sécurité Et D'utilisation page 25

Status Indicator Light
The green Status Indicator Light on the Lower
Crossbar (Figure 23) lights up when you install a
charged Battery and insert the Safety Key.
NOTE: A green Status Indicator Light does not
guarantee that the Battery is fully
charged, only that it has some charge, the
Safety Key has been inserted, the electrical
system is ready, and that the Mower can
be started.
IF THE GREEN STATUS INDICATOR LIGHT GOES OUT, DO NOT OPERATE THE MOWER AGAIN UNTIL THE
BATTERY IS FULLY CHARGED. IF YOU DO, THIS WILL RESULT IN DECREASED CHARGING CAPACITY.
NOTE: Although you may notice that a short period of rest may restore the Status Indicator Light, you
still must fully charge the Battery before continuing to mow. For best results, be sure to always
fully charge the Battery after every use.
Cutting Height Lever
The Cutting Height Lever (Figure 24) allows
you to easily adjust how high or low you cut
the grass. Notice that there are six (6) different
Height Positions etched into the Mower body.
To easily move the Cutting Height Lever, hold
TIP
the Handlebar with your right hand to keep
the Mower steady and adjust the Lever with
your left hand.
To easily adjust this Lever, pull the Lever out
before lifting or lowering it. Once you pull the
Lever out, it very easily adjusts to a different
level.
Mower/Auxiliary Switch
The Mower/Auxiliary Switch (Figure 25)
controls the optional Mower attachments. This
Switch has two (2) settings.
•
Mower (rear position), used for normal
mowing, and
•
Auxiliary (forward position), used when
operating an attachment. For more
information about options available for
your NEUTON Mower, see "Chapter 6:
Optional Attachments".
NEUTON CE 5.2 Battery-Powered Mower -
All manuals and user guides at all-guides.com
Safety & Operating Instructions
Status Indicator Light
Figure 23
Cutting Height Lever
Figure 24
Mower/Auxiliary
Switch
Figure 25
21