Grundig SM 8680 Mode D'emploi page 18

OPERATION­______________________________
Caution­
Never move or turn the glass jug after it is prop-
█
erly seated in the place.
7­­
C onnect the power plug to a suitable power
outlet.
8­­
T he cutting speed can be variably adjusted
with the control dial H
Notes­
To operate the blender at low speed, turn the
█
H
control dial to "1".
If you want to blend with a higher speed, turn
█
H
the control dial to the desired speed level
(5-6).
For short pulses of blending with a high speed,
█
turn the control dial H
lease the control dial
and return to "0" automatically.
If ingredients are to be added during the
█
blending process, then add them through the
opening in the lid . To do this, take out the
B
cap/measuring cup
A
9­­ A fter the desired consistency of the blended
food has been reached, turn the control dial
H
to 0 to switch off the blender.
Caution­
Never run the blender for longer than 1 min-
█
ute, otherwise it would overheat.
After running the appliance for 1 minute, let it
█
cool down before using it again.
Be sure the motor is switched off and has com-
█
pletely stopped before removing the glass jug
from the motor housing
D
Do not place any utensil (scraper, fork, etc.) in
█
the glass jug while blender is operating.
10­­Pull the power plug out of the power outlet.
11­­Take the glass jug
D
ing by lifting the glass jug upwards (do
G
not try to rotate it) and open the lid
12­­Take off the lid and pour the mixture into
glasses or other containers.
18 ENGLISH
All manuals and user guides at all-guides.com
.
to "P". When you re-
H , the blender will stop
.
.
G
off from the motor hous-
.
C