Husqvarna G483ST Manuel Du Propriétaire page 8

5
UPPER CHUTE (See Figs. 5A and 5B)
1. Lower mower to its lowest cutting position.
2. Assemble upper chute by inserting curved end into
hole in back of cover.
TIP: Holding upper chute as shown and twisting while
installing in cover will help keep the rubber seal in place.
NOTE: Handle carefully so as not to damage full bag
indicator.
COVER
3. Push in and turn upper chute until it is in line with lower
chute.
4. Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5. Secure with rubber latch by hooking hole in latch over
latch pin.
COVER FULL BAG INDICATOR
UPPER CHUTE
FIG. 5A
HANDLE
LATCH PIN
ALIGNMENT
SLOT
BOSSES
LOWER CHUTE
FIG. 5B
6
LEVEL MOWER DECK
Be sure deck is properly leveled for best mower perfor-
mance. See your tractors owner's manual for instructions.
UPPER
CHUTE
RUBBER
LATCH
8