Carton Contents; Tools Required For Assembly; Parts Identification - Husqvarna G483ST Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS
CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the
assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass
Catcher and to prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe
eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing.
We recommend a wide vision safety mask for over the spectacles or standard safety glasses.
COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from carton.
Check carton contents against list. Be sure all parts
are there.

TOOLS REQUIRED FOR ASSEMBLY:

(1) 9/16" Wrench
COVER
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor, in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
Disconnect spark plug wire from plug and place where it cannot come in contact with plug.

CARTON CONTENTS:

(3) Containers
(1) Upper Chute
(1) Lower Chute
(2) Support Assemblies

PARTS IDENTIFICATION

SUPPORT
ASSEMBLY
FULL BAG
INDICATOR
RETAINER
SPRING
UPPER
CHUTE
LOWER CHUTE
4
(1) Cover Assembly
(2) Shoulder Bolts
(1) Retainer Spring
(2) Adapters
CHUTE
LATCH
SUPPORT
ASSEMBLY
LOWER CHUTE
ATTACHING STRAPS
SHOULDER
BOLTS
ADAPTERS

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

960 73 00-25

Table des Matières