Eaton Cooper Fail-Safe MCS Serie Instructions D'installation

697916 ADC140278
Installation Instructions – MCS, MCT, MTS, MTT Series
Instructions d'installation - Modèles MCS, MCT, MTS et MTT
Instrucciones de instalación (Series MCS, MCT, MTS y MTT)
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
Safety: When using electrical equipment, basic safety
precautions should always be followed including the
following:
1. Do not mount near gas or electric heaters.
2. The use of accessory equipment not recommended
by the manufacturer may cause an unsafe condition.
INSTALLATION
1. Remove wireway from housing.
2. Remove the appropriate knockout(s) for the SUPPLY
WIRES.
3. Mount housing in desired location using the housing
as a template (Figure 1.).
4. Hang wireway from housing and make SUPPLY WIRE
connections (Figure 2.).
Building Supply
Wires (by Others)
LINE
NEUTRAL
GROUND
Fixture Housing
Figure 2.
3.
4.
Risk of electrical shock. Disconnect power before
installation.
BLACK
Figure 1.
WHITE
GREEN
Brand Logo
reversed out of
black
Do not use this equipment for other than intended
use.
All servicing should be performed by qualified service
personnel.
WARNING
INS # INS # INS #
Screw Mounting Holes