Night & Day Furniture TRINITY ARM Instructions De Montage

Assembly
Instructions
1 One pair of Bifold Arms
2
Hardware in this box
60mm Bolts x 4
For the Back Leg
3
Fasten Stretcher Brackets to Arm
Leg
Dowel
Hole
Hole for
Bolt
Hole for
cleat
A. Insert the Stretcher Bracket Cleat
into the hole provided.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
C. Each arm requires two brackets, front and back.
i
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
TRINITY ARM
Outside View
Scale 1: 1
100mm Bolts x 4
For the Front Leg
Cleat
Stretcher
Bracket
16mm Bolt
Allen Key
16mm Bolts x 4
For the Stretcher Brackets
4
Assemble the Bifold Body
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
NOTE:
Fitting
Wooden
Dowels
Wooden Dowel
5
Fit Wood Button Into Arm Holes
AFTER TOTAL ASSEMBLY:
Push fit or lightly tap
the wooden buttons
into the bolt holes
on the arms.
See below for
Preparation of arms
for assembly.
Inside View
Wood Button
x 8
Wooden
Dowel x 4
Allen Key
x 1
Tap Wooden Dowels all the
way into the middle hole
before assembly to Arms.
Page 1 of 1
BA-TRI-1118
Barrel
Nuts x 8
Stretcher
Bracket
x 4
Stretcher
(BODY BOX)