Night & Day Furniture TWILIGHT ARM Instructions De Montage

Assembly
Instructions
1 One pair of Bifold Arms.
i
Outside View
2
Hardware in this box.
80mm Bolts x 8
For the Front & Back Legs
60mm Bolts x 4
For the Wood Brackets
16mm Bolts x 4
For the Stretcher Brackets
3
Fasten Stretcher Brackets to Arm.
Dowel Hole
Hole for bolt
Hole for cleat
Leg
Insert the Stretcher Bracket Cleat
A.
into the hole provided.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
C.
Each arm requires two brackets, front and back.
i
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
TWILIGHT ARM
Barrel Nuts x 8
Wooden Dowel x 4
Allen Key x 1
Stretcher
Bracket x 4
Cleat
16mm Bolt
Allen Key
Wood Brackets
x 4
4
Assemble the Bifold Body.
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
NOTE:
Fitting
Wooden Dowels
Dowel from
ARM box
5
Fit Wood Brackets to the Arms.
Only after the Arms and Body have been completely
assembled, fix the Wood Brackets to the Arms.
Lift the Seat Deck to access the Bolt holes.
Before you attach the Wood
Brackets, make sure all other
Stretcher
Bolts are firmly tightened.
Bracket
Wood
Bracket
Front Leg
See below for
Preparation of arms
for assembly.
Inside View
Stretcher Rail
from BODY box
Tap dowel all the way into this
hole before assembly to arm.
60mm Bolt
Page 1 of 1
BA-TWI-1016