Private Zone; Tamper Monitoring - Abus TVHD80100 Notice D'utilisation

Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2. Select whether the settings should be applied to all
days of the week with using Copy.
3. Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Parameter
Full Screen Monitoring
Audible Warning
Send E-Mail

Confirm the settings by clicking Apply and leave the
menu with OK

Private Zone

Select the camera channel under "Camera".
Select the checkbox for activating the private zone.
1. Select up to four private zones with the mouse.
2. Select Copy if the setting is to be applied for all
cameras.
3. Confirm the settings by clicking Apply and exit the
menu with OK.
93
Notification
The camera is displayed as
a full-screen picture in live
cast
The device emits a repeat-
ing tone
An e-mail is sent to a specif-
ic e-mail address.

Tamper monitoring

Select the camera channel under "Camera".
Select the checkbox for activating tamper monitoring.
Armin Schedule
Select the TAB Arming Schedule.
Here you set the times when the reactions in the TAB
Reaction are triggered.
1. Select the day and enter the schedule.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2. Select whether the settings should be applied to all
days of the week with using Copy.
3. Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Camera