Medion LIFE X14360 Guide Rapide page 89

3.7.1. Network/Internet settings
NETWORK TYPE Here you select the network type:
making a selection
with the
a selection and confirm with the
network, a virtual keyboard appears which you can use to enter this with the
help of the direction buttons  and the
password, select
PRESS WPS ON This option enables you to quickly establish a WPS connection via a wireless
YOUR WIFI
network (Wi-Fi). Hold down the WPS button on your router and confirm this
ROUTER
option
(only for WLAN)
INTERNET Press the
SPEED TEST
ADVANCED Press the
SETTINGS
CONFIGURATION
CONFIGURATION
NETWORKED
Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
STANDBY MODE
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode.
 Exit the network settings by pressing
12
1 2
Network/Internet Settings
You can configure network settings to access content on your home network and the internet. Select „Next" to scan
wireless networks.
Network Type Network Type
Press WPS on your wifi router
Internet Speed Test
Advanced Settings
Networked Standby Mode
Disconnected
MAC:
Network settings
with the direction buttons  and confirming
NEXT
button, an overview of all available networks appears. Make
O K
on the keyboard and confirm with the
OK
using the button. Then the WPS connection will be made.
OK O K
button in order to test the Internet speed.
O K
button to call up further network configuration options.
O K
Choose the setting
you select
in which you can manually enter the data for the
ADRESS, SUBNET MASK
the direction buttons  and the number buttons.
Select here between
DNS
appear in which you can manually enter the data
for the
direction buttons  and the number buttons.
setting to activate this function. The device being used as a remote
ON
.
O K
3 4 5
< < Wireless Device Wireless Device Wireless Device
On
Next
OK BACK
WIRELESS DEVICE
button. If a password is required for a
O K
O K
AUTOMATIC IP
, three additional lines appear
MANUAL IP
and
AUTOMATIC DNS
. If you select
MANUAL DNS
and
DNS SERVER 1 DNS SERVER 2
> >
EXIT HOME
or . After
WIRED DEVICE
button. After entering the
button.
O K
or . If
MANUAL IP
IP
using
DEFAULT GATEWAY
or
MANUAL
, two additional lines
using the