Product Overview; Symbols On The Product - Husqvarna K 7000 Manuel D'utilisation

Product overview

1. Rear handle
2. Switch for water supply
3. Blade guard
4. Bolt to lock the blade guard axle
5. Water connection with filter
6. Adjustment handle for the blade guard
7. Cutting blade (not supplied)
8. Cutting equipment decal
9. Front handle
10. Inspection covers
11. Display
12. Water tap
13. Power trigger lockout
14. Power trigger
15. Water connection, inlet
16. Flange, spindle and arbor bushing
17. Belt tensioner
18. Cutting head
19. Cutting arm
20. Belt guard
21. Type plate
22. Water connection, outlet (return hose)
23. Power pack connection
24. Combination wrench
25. Bushing, decal and water connector
26. Operator's manual
1448 - 003 - 13.02.2020
27. Information and warning decal
28. Husqvarna high frequency power pack, (necessary,
not supplied)

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 8 .
This product complies with applicable EC
Directives.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Personal protective
3