D-Link DCS-6112 Guide D'installation page 6

General Connection (without PoE)
Connect the network camera to a switch or router via an Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection with a PoE Switch
If using a PoE switch, connect the network camera to the switch via an Ethernet cable,
which will provide both power and data transmission over a single cable.
6 D-Link DCS-6112/DCS-6113 Quick Install Guide
DCS-6112_6113_A1_QIG_v1.00(EU).indd 6 2011/7/5 上午 09:52:38