Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 12 Friday, February 10, 2023 11:43 AM
12 INSTALLATION
CAUTION
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
Removing the Hinge Cover
Remove the screws from the hinge cover at the top
of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
with a flat-head screwdriver.
Removing the Freezer Door
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
to detach the water supply
a
line as shown.
NOTE
• Disassembling/Assembling the Water Lines
Collet
Tube
Insert line
b
c
d
2
3
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
4
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
5
Clip
e
Remove the screws from the water line cover
and detach the cover.
f
Pull out the water supply lines
all the wire harnesses
. Unscrew the ground
h
wire
.
i
Rotate the hinge lever
counterclockwise.
j
Lift the top hinge
free of the hinge lever
k
latch
.
l
CAUTION
Free the hinge from the water lines and wire
harnesses and set it aside.
. Disconnect
g
Publicité
