Switching The Device On For The First Time; The Switch; Switching The Device On / Off; Locking Commands - Thermor Riva 3 Mixte Notice D'installation Et D'utilisation

SUMMER / WINTER use

SWITChINg ThE DEvICE ON FOR ThE FIRST TIME

Select the language, then the date and time.
The first time you switch the device on,
-
programming is inactive,
-
the setpoint temperature is set at 19° C.
An On/Off switch is located at the rear of the device's unit.
Use the switch for extended shutdowns only
(excluding heating periods).
Set the switch (located at the rear of the appliance) to I to switch the
appliance on. When the appliance is switched off, you may need to set
the day and time again.
To shut down the device, press and hold
Confirm "Switch off" by pressing
To switch the device on, press and hold
To avoid the commands being changed by children, you may lock your
device's commands by pressing and holding
Select "Lock"
Do the same to unlock the commands by selecting "Unlock"

ThE SWITCh

SWITChINg ThE DEvICE ON / OFF

LOCkINg COMMANDS

and validate with
.
.
.
.
.
30
.