Technical Data; Maintenance And Storage - elem Garden Technic TDAM30BAG Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8. Operation
The hand mower can cut grass up to approx. 10 cm
in length. If you want your lawn to have a neat,
trimmed look to it, however, you must consistently
keep it cut down to a more manageable height.
When starting the mowing session (and when
mowing over freshly laid sod), it is advisable to set
the cutting height relatively high, then gradually
work your way down.
For a well-groomed look, the cutting height should
be set to approx. 2.5 cm.
For optimum results, mow your lawn on a weekly
basis. Grass blades grow thicker, faster, and are
more resilient when their stems are consistently
kept short (unless you live in very dry conditions and
do not frequently water). Always mow the lawn
when it is reasonable dry. In order to ensure that
your lawn has a clean, even look to it when you're
finished, mow in fairly straight paths at walking
pace. The cutting swaths should always overlap
each other by a few centimeters in order to avoid
unsightly strips of grass.

9. Maintenance and storage

_ Clean the machine with a brush or rag after each
use.
_ Store the machine in a location that is dry and not
accessible by children.
_ Ensure that all mounting components (i.e.
screws, bolts, nuts etc.) are always tightened so
that the machine can be safely operated at all
times.
_ Replace excessively worn or damaged parts
immediately.
_ In order to ensure that you enjoy your scarifier for
many years to come, all screwed parts, as well as
the wheels and axles, should be cleaned and
lubricated.
_ Keeping your hand mower in good condition not
only ensures a long lifespan and high
performance, but also enables the machine to
thoroughly cut your grass with minimal effort.
_ The blade on the mower spindle is subject to
more wear and tear than any other component of
the unit. Check the condition of the blade on the
mowing spindle at regular
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
ELEM GARDEN TECHNIC application service team
will gladly answer questions concerning our
products and their accessories: sav@eco-repa.com
10. Garantee
Pour les clauses de garantie, reportez-vous aux
conditions de garantie ci-jointes.

11. Technical Data

Width of cut : 30 cm
Height of cut : 12-45 mm
Adjusting the cutting height : progressive
Net Weight : 6.7kg
Made in China
2019

Publicité

Table des Matières
loading

Table des Matières