ALFRA TMA 600 A Manuel D'utilisation page 13

TechnicAL dATA
Prod.-No.
Designation
Breakaway force:
(at 0° inclination to the load)
Max. load-bearing capacity:
(at 90° inclination of the load)
Max. load-bearing capacity:
(at 90° inclination of the load)
Dead weight of the unit
Storage temperature
Operating temperature
MARkingS on The MAgneTic cLAMP
Detailed descriptions for handling and operating conditions of the TMC 300 can be found on
the upper side of the magnetic clamp. This labeling must not be modified, damaged or removed.
New labels must be ordered from the manufacturer if necessary.
Laser marking incl. serial number
on the upper side of the cap
41100.A
Adjustable welding angle
per TMC >300 kg on 6 mm
S235
30% of the breakaway force 30% of the breakaway force
per TMC 100 kg on 6 mm
S235
2.75 kg
-30°C to +60°C
-30°C to +60°C
>660 lbs on 0.25" AISI CRS 1020
220 lbs on 0.25" AISI CRS 1020
6.1 lbs
-22°F to +140°F
-22°F to +140°F
Prod.-No.: 189414246
Sticker "Safety instructions"
13