Télécharger Imprimer la page

essentiel b EEXJ3 Notice D'utilisation page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Settings:
The juicer has five five settings.
-
" " (reverse) spins in the opposite direction
to release ingredients. This feature helps with
cleaning the machine. The function helps
prevent food from getting stuck in the machine.
The function lifts the fruits and vegetables
upwards. The reverse function protects the
juicer from the overloading of ingredients or
hardened ingredients and corrects the juice
extraction process. Use about 3-5 seconds
and stop it. Repeat 2-3 times.
-
"
": stops the juicer after the process is
completed.
-
" ": for fruit or vegetable juices.
-
" ": for ice creams and smoothies with frozen fruit.
-
" ": simple clean and help to release ingredients.
1. Prior to start, make sure that the lid is properly secured in the correct position and
the function knob is in the
2. Connect the juicer to the mains supply.
3. To turn on the appliance, turn the function knob to the " " or " " position. When
using the ice cream strainer, the juice can flow out through the outlets and it is
normal operation.
4. Take the pusher out of the chute.
5. Make sure the juice cap is closed properly.
6. Gradually add the prepared ingredients into the chute and use the pusher to push
them down. You will get the best results if you fill the chute gradually by pushing
the ingredients down gently, little by little.
Caution! Do not press ingredients with anything except the pusher
provided.
7. If the juicer stops during use due to overloading, turn the function knob to " "
position to run in reverse direction.
8. Note: Add the last ingredients and keep it running for at least 1 minute. The slow
22
V.1.0
operation
position.

Publicité

loading