Safety Lock; Mounting The Hose; Ratchet Device; Connection Duct - Nederman Exhaust Hose Reel 865 Manuel D'instruction

4. Fit the hose stop on the hose in such position that the nozzle stops in a
desired position when the hose is recoiled.
4.2

Safety lock

See Figures 3–4.
WARNING! Risk of personal injury.
The reel is equipped with a safety lock which should be used during service or
repair work on the reel, for example when mounting or changing the hose.
NB! When changing the spring the spring power must be completely
neutralized (instruction is delivered together with the spare part spring).
4.3

Mounting the hose

See Figure 3. When the reel has been mounted on wall or ceiling, the hose is
mounted in the following way (concerning reels delivered without hose only):
1. Fasten the hose with a hose clip on the connecting piece inside the drum.
2. Pull out the safety lock.
3. Wind all the hose on, by turning the drum in the direction of the arrow.
Ensure that the hose only forms one layer on the drum.
4. Tension the spring. See "Adjustment of spring tension" page 14.
5. Fit the hose stop on the hose in such position that the nozzle stops in a
desired position when the hose is recoiled.
6. Fit the nozzle.
4.4

Ratchet device

See Figure 4. The reel is fitted with a ratchet device which lock's the hose in
the desired position. The ratchet is released when the hose is pulled out slightly
further and the hose is then automatically recoiled. The ratchet is factory set
for ceiling mounting of the reel (position A). When mounting the reel on wall,
the ratchet must be moved from position A to B.
N.B.
The ratchet must, after it has been mounted,point towards the centre of
the reel.
4.5

Connection duct

See Figure 5. The connection hose supplied with the reel, should be used for
connecting the reel to duct systems and a central fan.
NB!
The duct must be fitted with hose clips. Do not drill or fit with screws.
4.6

Fan positioning

A suitable fan can be selected from the Nederman fan range. To avoide leakage
in the ducting system the fan should be positioned outdoors or as near the duct
outlet in the room as possible.
Exhaust Hose Reel Serial 865 EN
144233(02) 13