Preface; Description; Technical Data; Installation - Nederman Exhaust Hose Reel 865 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
EN
Exhaust Hose Reel Serial 865
2

Preface

To guarantee a correct function and a minimal service, it is important to read
and understand the information in this instruction manual.
The product is designed to meet the requirements of the relevant EC directives.
To maintain this status all installation, repair and maintenance work must be
carried out by qualified personnel using only original spare parts. Contact your
nearest authorised dealer or AB Ph. Nederman & Co. for advice on technical
service or if you require spare parts.
3

Description

3.1

Technical data

Table 3-1: Technical data
Exhaust Hose Reel
Weights, short reel,
without hose
Weights, short reel,
with hose and nozzle
Weights, wide reel,
without hose
Weights, wide reel,
with hose and nozzle
Recommended mounting height
Duct connection
Recommended airflows,
cars, 75–100 mm (3"–4") hose
Recommended airflows,
trucks, 125–150 mm (5"–6") hose
Operating temperature
Hose temperature resistance,
Hose NR-CP or NTP
Hose temperature resistance,
Hose NFC-3
Noise level, Measured according to ISO 11201.
Material recycling, Reels without hose
4

Installation

4.1

Installing Serial 865

See Figure 2. Maximum mounting height for the reel is 6 m.
1.
Make sure that the surface, on which to mount the reel, is level. Drill 4
holes, using the hole template which comes in the package.
2.
Fit the mounting brackets in such a way that will make the reel hanging
horizontally. Ensure that suitable fixing bolts are used considering the
ceiling or wall construction material. The bolts must each stand a tractive
force of minimum 6500 N.
3.
Use approved lifting equipment to lift the reel. Fasten the reel in the
brackets.
12
144233(02)
23 kg (51 lbs)
30–40 kg (66–82 lbs)
31 kg (68 lbs)
40–50 kg (82–110 lbs)
Maximum 6 m (20 ft)
Ø 160 mm (6.3 in)
400–600 m
/h (235–350 cfm)
3
800–1200 m
/h (470–700 cfm)
3
–10 °C to +50 °C (15 °F to 120 °F)
150 °C (300 °F) continuously
300 °C (570 °F) continuously
< 70 dB(A)
100 weight-%

Publicité

Table des Matières
loading

Table des Matières