Toro 51701T Manuel De L'utilisateur page 6

Charging the Battery Pack
Note: For best results, your battery tool should be charged in a
location where the temperature is in accordance with the chart
below. To reduce the risk of serious personal injury, do not store
outside or in vehicles. Charging time will be increased if not
charged within this range.
Battery voltage Minimum charging
temperature
20 V 0° C (32° F)
24 V
5° C (41° F)
1. Turn the battery upside down and line up the battery terminal
with the slot in the charger (Figure 6 and Figure 8).
20V, Sweeper model 51701
1. LED indicators
Maximum
charging
temperature
40° C (104° F)
40° C (104° F)
Figure 6
2. Insert battery here
24V, Sweeper model 51702
1. LED indicators
1. LED indicators (level of
charge)
2. Release button
2. Slide the battery into the charger until it clicks into place.
3. To remove the battery, press up on the release button and
slide the battery backward out of the charger.
6
Figure 7
2. Insert battery here
Figure 8
3. Battery terminal