Kärcher K 4.800 eco!ogic Notice Originale page 17

Description of the Appliance
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out page!
1 Coupling element for water
connection
2 Suction hose
3 High pressure hose
4 Quick coupling for high pressure hose
5 Water connection with integrated sieve
6 Appliance switch (0/OFF – 1/ON eco).
7 Dosage regulator for detergent
8 Storage for trigger gun
9 Transport handle, detachable
10 Storage for high-pressure hose
11 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
12 Storage for accessories
13 Storage hook for mains connection cable
14 Plug 'n' Clean detergent bottle with
locking lid
15 Mains cable with mains plug
16 Wheels
17 Trigger gun
18 Lock trigger gun
19 Key to detach the high pressure hose
from the trigger gun
20 Spray lance with pressure regulation
(Vario Power)
21 Spray lance with Dirtblaster
Optional
22 Water filter (order no. 4.730-059)
Switch position "eco"
There are the switch positions "1/ON" and
"eco" to switch the appliance on.
Note: The switch position "eco" allows the
control of pressure and leads to water and
energy savings of approx. 20% by using the
spray lance.
Recommended application ranges for
switch position "eco"
K 4.800 / K 5.800 eco!ogic
Additional application ranges for switch
position "eco"
K 5.800 eco!ogic
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install wheels
 Illustration
1 Push the wheels into the intake.
2 Secure the wheels using the included
plug. Align the plug properly!
Install the storage for hand-spray gun
 Illustration
Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
 Illustration
Press in the storage hook and lock it
into the top position.
Install the transport handle
 Illustration
Place the transport handle into the in-
take until you feel resistance. Use the
heel of your hand or a soft rubber mallet
to position it.
– 8
EN 17